Description
The AB-1070 vacuum blast machine is an environmentally friendly dust free blasting solution which is easy to use, versatile and powerful.
The use of steel abrasive provides cost effective, efficient and powerful blasting as well as close control of the surface preparation.
Easily inter-changeable blast head fittings allow a variety of surfaces to be blasted including: flat, inside & outside corners, small & large diameter pipes etc.
Additional accessories are available for specific applications such as to blast large horizontal surfaces or the edges of steel plates.
As the process is safe and dust free other production processes can be carried out close to the blasting operation.
Features
• “Stand alone” unit includes automatic dust extraction and abrasive recycling system
• Quickly interchangeable blast head fittings to blast different surface shapes
• Fully pneumatic
• Allows blasting from low to high pressure (1 – 8 bar)
• Maximum hose length of 35 meters
• Can be incorporated into an automatic on-line blasting process
Benefits
• Totally dust free environmentally friendly blasting
• Other job site operations can be conducted close to the blasting area
• Zero dust contamination on the job site
• Many common shapes can be blasted with ease
• Low operation cost due to the use of steel abrasive
• Flexible and versatile
Surface | Abrasive type | Abrasive size | Obtained surface quality | Average production capacity per hour |
---|---|---|---|---|
Steel: millscale, coatings and or corrosion | Alu-oxyde Chilled iron Steel grit | 0.8-1.2 mm. G17 / G24 | SA 2½ (SP10) | 4 - 9 m2 |
Steel: heavy corrosion | Alu-oxyde Chilled iron Steel grit | 0.8-1.2 mm. G17 / G24 | SA 2½ (SP10) | 3 - 8 m2 |
Steel: blasted with shot primer | Alu-oxyde Chilled iron Steel grit | 0.8-1.2 mm. G17 / G24 | SA 2½ (SP10) | 5 - 9 m2 |
Steel: Chlorinated rubber coating | Alu-oxyde Chilled iron Steel grit | 0.8-1.2 mm. G17 / G24 | SA 2½ (SP10) | 1.5 - 5 m2 |
Weld seams: steel | Alu-oxyde Chilled iron Steel grit | 0.8-1.2 mm. G17 / G24 | SA 2½ (SP10) | 80 - 120 mtr/hr. (50 mm. width) |