Description
Elcometer 456 Probe
Fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.
Ferrous coating thickness gauge probes measure non magnetic coatings on ferro-magnetic substrates. Elcometer 456 coating thickness ferrous gauges accept any ferrous probe.
Non-ferrous coating thickness gauge probes measure non conductive coatings on non-ferrous metal substrates and Elcometer 456 non-ferrous gauges accept any non-ferrous probe.
Dual FNF probes measure both ferrous and non-ferrous applications with automatic substrate detection. Elcometer 456 FNF coating thickness gauges accept all ferrous, non-ferrous and dual FNF probes.
Elcometer 456 Coating Thickness Gauge Probe Range Explained
![Elcometer 456 Straight Probe 456 straight probe](https://airblastaustralia.com/wp-content/uploads/2019/08/Straight-Probe.jpg)
Straight Probes
Measure coating thickness on both flat and curved surfaces
![Elcometer 456 Mini Probe 456 mini](https://airblastaustralia.com/wp-content/uploads/2019/08/Mini-Probe.jpg)
Mini Probes
Ideal for measuring coating thickness on edges, narrow pipes or small surface areas
![Elcometer 456 Right Angle Probe 456 right angle probe](https://airblastaustralia.com/wp-content/uploads/2019/08/Right-Angle-Probe.jpg)
Right Angle Probes
Designed for taking coating thickness readings where access is restricted
![Elcometer 456 PINIP Probe 456 PINIP](https://airblastaustralia.com/wp-content/uploads/2019/08/High-Temp-Probe.jpg)
PINIPâ„¢ Probes
Plug-in probes convert a separate coating thickness gauge into an integral gauge
![Elcometer 456 Telescopic Probe 456 telescopic probe](https://airblastaustralia.com/wp-content/uploads/2019/08/Telescopic-Probe.jpg)
Telescopic ProbesExtending right angle probes for out of reach areas
![Elcometer 456 Ultra/ Scan Probe 456 ultra scan](https://airblastaustralia.com/wp-content/uploads/2019/08/Ultra-Scan-Probe.jpg)
Ultra/Scan ProbesThese probes are fitted with replaceable probe caps – allowing users to take individual coating thickness measurements or scan large surface areas without damaging the probe
![Elcometer 456 Waterproof Probe 456 waterproof](https://airblastaustralia.com/wp-content/uploads/2019/08/Waterproof-Probe.jpg)
Waterproof Probes
Sealed for use underwater at depth, even in diving gloves
![Elcometer 456 High Temperature Probe 456 High Temp](https://airblastaustralia.com/wp-content/uploads/2019/08/High-Temp-Probe.jpg)
High Temperature Probes
For use on hot coated materials up to 250°C (480°F)
![Elcometer 456 Anodiser Probe 456 anodiser](https://airblastaustralia.com/wp-content/uploads/2019/08/Anodiser-Probe.jpg)
Anodiser Probes
Chemical resistant washable probes – ideal for the anodising environment
![Elcometer 456 Armoured Probe 456 arnoured probe](https://airblastaustralia.com/wp-content/uploads/2019/08/Armoured-Probe.jpg)
Armoured Probes
Probes with metal reinforced heavy duty cables, reducing the risk of cable damage
![Elcometer 456 Soft Coating Probe 456 soft coatings](https://airblastaustralia.com/wp-content/uploads/2019/08/Soft-Coating-Probe.jpg)
Soft Coating Probes
Large surface area probes for soft reach materials (HVCA approved)
![Elcometer 456 Specialist Probe 456 specialist](https://airblastaustralia.com/wp-content/uploads/2019/08/Specialist-Probe.jpg)
Specialist Probes
These probes are designed for measuring coating thickness on specialist substrates, such as graphite, or electroplated components
Elcometer probes have a maximum operating temperature of 80°C (176°F) with the exception of separate ferrous probes 150°C (300°F) and Hi-Temperature PINIP’s 250°C (480°F). The stated temperature is the substrate temperature, and the duty cycle of the probe must be reduced to ensure a minimal temperature build-up within the probe.
All Elcometer coating thickness gauge probes are supplied with a Test Certificate and a set of calibration foilsappropriate to the scale range of the probe.