Surface Contamination

Elcometer 456 Gauge Ferrous Integral probe Scale 1

The Elcometer Coating Thickness Gauge sets new standards; providing reliable and accurate coating thickness measurements; helping you to become more efficient.

Elcometer 456 Gauge Ferrous Separate

The Elcometer Coating Thickness Gauge sets new standards; providing reliable and accurate coating thickness measurements; helping you to become more efficient.

Elcometer 266 Handle 0.5- 30KV with Cal Cert

Dual safety switch on handle to avoid accidental switch on, cuts voltage output when users hand is not gripping handle.

Chlor Test Kit

Chlor Test Kit for Surfaces allows the surface to be tested for chloride salts prior to application of a coating.

Elcometer 106 Pull-Off Adhesion Tester

The Elcometer 106 Adhesion Tester is easy to operate and fully portable Type II adhesion gauge which provides a numerical value for adhesion strength.

Elcometer 236 DC Holiday Detector

Designed to accurately, measure surface chloride, sulphate and nitrate ions in minutes, the Elcometer 134 CSN Salt kit offers a single kit solution for testing in the field.

Brestle Conductivity Kit

It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved.

Elcometer Dewpoint Meter

The Elcometer 319 Dewpoint Meter with a robust temperature sensor is designed to measure and record all relevant climatic parameters required to determine whether the conditions are suitable for painting.

Elcometer 266 Holiday Detector with Cal Cert (excludes handle)

The Elcometer 266 revolutionizes high voltage DC testing of coatings porosity detection making it safer, easier and more reliable than ever before.

Bresle Patches 50 Pk

The 135A Bresle Patches are used to determine surface chloride contamination.

See all Surface Contamination products

Brestle Conductivity Kit

It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved.

SKU: TES-E1381 Categories: Elcometer, Surface Contamination Tag: Inspection & Testing

Description

Brestle Conductivity Kit

It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved.

If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs.

The Elcometer 138 Bresle Kit includes the Elcometer 138 Conductivity Meter. This lightweight, portable conductivity meter accurately measures the salinity of the test samples.

The sensor cartridge can be easily replaced when necessary and displays conductivity in a range of units including: S/cm, S/m, ppm and % salinity.

Elcometer 138 Bresle Salt Kit with Elcometer 135B Bresle Test Patches – E138-1

Kit Content:

Elcometer 135B Bresle Patch
Elcometer 138 Conductivity Meter & Sensor
Standard Calibration Solution
Moistening Solution
Bottle of Pure Distilled Water
Syringes & Needles
Plastic Beaker
CR2032 Lithium Batteries, Transit Case & User Guide

Specification

Brestle Conductivity Kit	0 mS/cm to 19.9 mS/cm and 0 S/m to 1.99 S/m
Accuracy	2% full scale ±1 digit
Dimensions	346 x 292 x 84mm (13.6 x 11.5 x 3.3")
Weight	1.1kg (2lb 7oz)
Packing List	Box of 25 Elcometer 135B Bresle Patches, Elcometer 138 Conductivity Meter & Sensor, 14ml (0.47fl oz) bottle of standard 1.41 mS/cm calibration solution, 14ml (0.47fl oz) bottle of moistening solution, 250ml (8.5fl oz) bottle of pure distilled water, 3 x 5ml (0.17fl oz) syringes, 3 x blunt needles, 30ml (1fl oz) plastic beaker, 2 x CR2032 batteries, transit case and user guide